Print this page

CHEMISTRY PAPER 3 - 2017 KITUI MOCK EXAMINATION

Rate this item
(0 votes)
Download PDF for future reference Install our android app for easier access

Click the link below to download the full 2017 KITUI MOCK EXAMINATIONS pdf document, with all the topics.

https://downloads.easyelimu.com/details/80-2017_KITUI_MOCK_EXAMINATION

  1. You are provided with;
    • Aqueous hydrochloric acid labeled solution A.
    • Solution B containing 8.0 g per litre of sodium carbonate.
    • An aqueous solution of substance C labeled solution C

    You are required to determine the;

    • Concentration of solution A.
    • Enthalpy of reaction between hydrochloric acid and substance C

    Procedure I
    Using a pipette and pipette filler, place 25.0cm3 of solution A into a 250ml, volumetric flask.
    Add distilled water to make 250cm3 of solution. Label this solution D.
    Place solution D in a burette. Clean the pipette and use it to place 25.0cm3 of solution B into a conical flask. Add 2 drops of methyl orange indicator provided and titrate with solution D. Record your results in table 1. Repeat the titration two more times and complete the table. (4 marks)

       I  II  III
     Final burette reading       
     Initial burette reading      
     Volume of solution D used (cm3)      
    Calculate;
    1. Average volume of solution D used.   (1 mark)
    2. Concentration of sodium carbonate in solution B.
      (Na = 23.0, O = 16.0, C = 12.0)      (1 mark)
    3. Concentration of hydrochloric acid in solution D.  (2 marks)
    4. Concentration of hydrochloric acid in solution A.  (1 mark)
    Procedure II
    Using a clean burette, place 2 cm3 of solution A into a boiling tube. Take the initial temperature of the solution in the boiling tube and record it in table 2. Using a clean measuring cylinder, measure 14 cm3 of solution C into 100cm3 beaker and add it to a solution A in the boiling tube. Stir the mixture immediately with a thermometer and record in table 2 the highest temperature reached. Repeat the experiment with the other sets of volumes of A and C in the table and complete it.
    (Rinse the thermometer and the boiling tube with distilled water after each experiment) (5 marks)
    Volume of solution A (cm3  2  4  6  8  10  12  14
     Volume of solution C (cm3)  14  12  10  8  6  4  2
     Initial temperature of solution C (0C)              
     Highest temperature of solution C (0C)              
     Change in temperature ΔT(0C)              
    1. On the grid provided, draw a graph of ΔT (vertical axis) against volume of solution A used. (3 marks)
    2. From the graph, determine;
      1. The maximum change in temperature.   (½ mark)
      2. The volume of solution A required to completely neutralize solution C.   (½ mark)
    3. Calculate the;
      1. Number of moles of hydrochloric acid required to completely neutralize solution C.  (1 mark)
      2. Molar enthalpy of reaction between hydrochloric acid and substance C (in kilojoules per mole of hydrochloric acid). Assume the specific heat capacity of the solution is 4.2 Jg-1K-1 and density of solution is 1.0 gcm-3.  (2 marks
  1. You are provided with solid Q. Carry out the following tests on Q and record your observations and inferences in the spaces provided.
    1. Place a spatula of solid Q into a boiling tube and add 12 cm3 of distilled water.
      Shake the mixture thoroughly. Divide the mixture into five portions.
       Observations  Inferences

      1 mark

      1 mark

    2. To the first portion, add 5 cm3 of 2M Nitric (V) acid.
       Observations  Inferences

      1 mark

      1 mark

    3. To the second portion, add four drops of lead (II) nitrate solution.
       Observations  Inferences

      1 mark

      1 mark

    4.  To the third portion, add four drops of Barium nitrate solution.
       Observations  Inferences

      1 mark

      1 mark

    5.  To the fourth portion, add sodium hydroxide solution dropwise until in excess.
       Observations  Inferences

      1 mark

      1 mark

    6. To the fifth portion, add ammonia solution dropwise until in excess.
       Observations  Inferences

      1 mark

      1 mark

  2. You are provided with substance Y.
    Carry out the following tests on Y and record your observations and inferences in the spaces provided.
    1. Describe the appearance of solid Y.   (1 mark)
    2. Scoop a little solid Y with a clean metallic spatula and ignite it using non-luminous part of the Bunsen burner flame.
       Observations  Inferences

      1 mark

      1 mark

    3. Add about 10 cm3 of distilled water to the remaining solid Y in a boiling tube.
      Divide the resulting mixture into 2 portions.
      1. To the portion one, add 3 drops of acidified potassium manganate (VII) solution.
         Observations  Inferences

        1 mark

        1 mark

      2. To portion two, add sodium hydrogen carbonate.
         Observations  Inferences

        1 mark

        1 mark

Read 146 times Last modified on Thursday, 09 May 2019 07:40
Print PDF for future reference Join our whatsapp group for latest updates

Related items