Drawing And Design Paper 2 Questions and Answers - Nginda Girls Mock Examination 2023

Instructions

• All the answers and working must be written on the question paper in the spaces provided below each question or in A3 paper provided.
• Label every work drawn on A3 paper provided

QUESTIONS

DESIGN PROBLEM (40 marks)

People working in an office in various institution often desire that their doors remain closed when they are inside. This posses a challenge to them whenever a visitor gets in and forgets to lock the door when the leave. Design an automatic door closing system considering the following:

1. It has bars that are fixed on the door board and frame.
2. It controls the speed at which it closes the door.
3. It is strong enough to withstand the force applied on it.
4. It is assembled on the door using screws.
Requirements
1. Make sketches of two possible solutions for your design (6 marks)
2. Select one of the designs in (a) above and make a refined labelled pictorial sketch (14 marks)
3. Make detailed sketches for the mechanisms to allow for each of the considerations above (15 marks)
4. List three materials used and state one reason for the choice of each. (3 marks)
5. State two methods of joining the parts and state where each is used (2 marks)

MARKING SCHEME

DESIGN PROBLEM (40 marks)

People working in an office in various institution often desire that their doors remain closed when they are inside. This posses a challenge to them whenever a visitor gets in and forgets to lock the door when the leave. Design an automatic door closing system considering the following:

1.  It has bars that are fixed on the door board and frame.
2. It controls the speed at which it closes the door.
3. It is strong enough to withstand the force applied on it.
4. It is assembled on the door using screws.
Requirements
1. Make sketches of two possible solutions for your design (6 marks)

Functionality-1 Functionality-1
Stability-1 Stability-1
Pictorial-1 Pictorial- 1
2. Select one of the designs in (a) above and make a refined labelled pictorial sketch (14 marks)

Labeling-2
Pictorial-2
Stability-2
Finctionality-3
Frame bars-3
Provision of joining method by use of screws- 2
3. Make detailed sketches for the mechanisms to allow for each of the considerations above (15 marks)

Frame bars- 3
Closing and opening position of the device- 5
Metal bar made of strong material- 1
Securing using screws- 2
Device that enhance automatic closing- 4
4. List three materials used and state one reason for the choice of each. (3 marks)
Steel- to make strong arms √ 1
Iron- for screws because it can easily be threaded√ 1
Rubber- used a washer in conjunction with bolts and nuts√ 1
5. State two methods of joining the parts and state where each is used (2 marks)
Use of bolt and nut- to join the arms√ 1
Screws- to secure frame bars on frames√ 1

• ✔ To read offline at any time.
• ✔ To Print at your convenience
• ✔ Share Easily with Friends / Students

Related items

.
Subscribe now

access all the content at an affordable rate
or
Buy any individual paper or notes as a pdf via MPESA
and get it sent to you via WhatsApp